Spring Cloud(八):分布式配置中心服务化和高可用详解编程语言
在前两篇的介绍中,客户端都是直接调用配置中心的server端来获取配置文件信息。这样就存在了一个问题,客户端和服务端的耦合性太高,如果server端要做集群,客户端只能通过原始的方式来路由,server端改变IP地址的时候,客户端也需要修改配置,不符合springcloud服务治理的理念。springcloud提供了这样的解决方案,我们只需要将server端当做一个服务注册到eureka中,client端去eureka中去获取配置中心server端的服务既可。
这篇文章我们基于配置中心git版本的内容来改造
server端改造 1、添加依赖dependencies dependency groupId org.springframework.cloud /groupId artifactId spring-cloud-config-server /artifactId /dependency dependency groupId org.springframework.cloud /groupId artifactId spring-cloud-starter-eureka /artifactId /dependency /dependencies
需要多引入spring-cloud-starter-eureka包,来添加对eureka的支持。
2、配置文件server: server: port: 8001 spring: application: name: spring-cloud-config-server cloud: config: server: git: uri: https://github.com/ityouknow/spring-cloud-starter/ # 配置git仓库的地址 search-paths: config-repo # git仓库地址下的相对地址,可以配置多个,用,分割。 username: username # git仓库的账号 password: password # git仓库的密码 eureka: client: serviceUrl: defaultZone: http://localhost:8000/eureka/ ## 注册中心eurka地址
增加了eureka注册中心的配置
3、启动类启动类添加@EnableDiscoveryClient激活对配置中心的支持
@EnableDiscoveryClient @EnableConfigServer @SpringBootApplication public class ConfigServerApplication { public static void main(String[] args) { SpringApplication.run(ConfigServerApplication.class, args); }
这样server端的改造就完成了。先启动eureka注册中心,在启动server端,在浏览器中访问:http://localhost:8000/ 就会看到server端已经注册了到注册中心了。
按照上篇的测试步骤对server端进行测试服务正常。
客户端改造 1、添加依赖dependencies dependency groupId org.springframework.cloud /groupId artifactId spring-cloud-starter-config /artifactId /dependency dependency groupId org.springframework.boot /groupId artifactId spring-boot-starter-web /artifactId /dependency dependency groupId org.springframework.cloud /groupId artifactId spring-cloud-starter-eureka /artifactId /dependency dependency groupId org.springframework.boot /groupId artifactId spring-boot-starter-test /artifactId scope test /scope /dependency /dependencies
需要多引入spring-cloud-starter-eureka包,来添加对eureka的支持。
2、配置文件spring.application.name=spring-cloud-config-client server.port=8002 spring.cloud.config.name=neo-config spring.cloud.config.profile=dev spring.cloud.config.label=master spring.cloud.config.discovery.enabled=true spring.cloud.config.discovery.serviceId=spring-cloud-config-server eureka.client.serviceUrl.defaultZone=http://localhost:8000/eureka/
主要是去掉了spring.cloud.config.uri直接指向server端地址的配置,增加了最后的三个配置:
spring.cloud.config.discovery.enabled :开启Config服务发现支持 spring.cloud.config.discovery.serviceId :指定server端的name,也就是server端spring.application.name的值 eureka.client.serviceUrl.defaultZone :指向配置中心的地址这三个配置文件都需要放到bootstrap.properties的配置中
3、启动类启动类添加@EnableDiscoveryClient激活对配置中心的支持
@EnableDiscoveryClient @SpringBootApplication public class ConfigClientApplication { public static void main(String[] args) { SpringApplication.run(ConfigClientApplication.class, args); }
启动client端,在浏览器中访问:http://localhost:8000/ 就会看到server端和client端都已经注册了到注册中心了。
为了模拟生产集群环境,我们改动server端的端口为8003,再启动一个server端来做服务的负载,提供高可用的server端支持。
如上图就可发现会有两个server端同时提供配置中心的服务,防止某一台down掉之后影响整个系统的使用。
我们先单独测试服务端,分别访问:http://localhost:8001/neo-config/dev、http://localhost:8003/neo-config/dev返回信息:
{ "name": "neo-config", "profiles": [ "dev" "label": null, "version": null, "state": null, "propertySources": [ "name": "https://github.com/ityouknow/spring-cloud-starter/config-repo/neo-config-dev.properties", "source": { "neo.hello": "hello im dev" }
说明两个server端都正常读取到了配置信息。
再次访问:http://localhost:8002/hello,返回:hello im dev update。说明客户端已经读取到了server端的内容,我们随机停掉一台server端的服务,再次访问http://localhost:8002/hello,返回:hello im dev update,说明达到了高可用的目的。
原创文章,作者:ItWorker,如若转载,请注明出处:https://blog.ytso.com/15671.html
cjava相关文章
- 技术硬实力,聊聊写Spring Cloud Alibaba实战派这本书的初衷
- 别再乱学 Spring Cloud 微服务了,这才是最新、最正确的使用方式!
- Spring Cloud实战|3.SpringCloud 整合Gateway
- Spring Cloud:第一章:基本介绍
- Spring Cloud:第三章:Ribbon客服端负载均衡
- Spring Cloud Gateway 服务网关的部署与使用详细教程
- 搭建spring cloud框架并且配置权限架构
- Spring Cloud Config 配置客户端使用
- Spring Cloud Config 与其他组件集成(二)
- 配置Spring Cloud Feign(一)
- Spring Cloud Gateway过滤器配置
- Spring Cloud Gateway 网关与微服务架构的整合(二)
- Spring Cloud Gateway监控配置示例
- 安装和配置Spring Cloud Security
- Spring Cloud Security配置JWT和OAuth2的集成实现授权管理(二)
- Spring Cloud Task 示例演示
- Spring Boot 2.x基础教程:使用Flyway管理数据库版本
- 配置 Spring Cloud Bus 的消息代理
- 部署和配置 Spring Cloud Data Flow
- Spring Cloud Data Flow配置数据源、应用程序、任务
- 配置 Spring Cloud Data Flow 的监控和安全控制
- 使用 Spring Cloud Data Flow 扩展自定义应用程序和任务(一)
- Spring Boot 集成 JUnit5,更优雅单元测试!
- Spring Cloud(七):使用SVN存储分布式配置中心文件和实现refresh详解编程语言
- Spring Cloud(五):熔断监控Hystrix Dashboard和Turbine详解编程语言