Linux下安装SVN服务端的方法步骤
2023-06-13 09:20:04 时间
我们在/home下建立一个名为svn的仓库(repository),以后所有代码都放在这个下面,创建成功后在svn下面多了几个文件夹。
[root@localhost /]# cd /home [root@localhost home]# mkdir svn [root@localhost home]# svnadmin create /home/svn [root@localhost home]# ls svn conf db format hooks locks README.txt
conf文件夹,是存放配置文件的
[root@localhost home]# cd svn/conf [root@localhost conf]# ls authz passwd svnserve.conf
### This file is an example password file for svnserve. ### Its format is similar to that of svnserve.conf. As shown in the ### example below it contains one section labelled [users]. ### The name and password for each user follow, one account per line. [users] # harry = harryssecret # sally = sallyssecret user1=123456 user2=123456
3、配置authz
[root@localhost conf]# vim authz ### This file is an example authorization file for svnserve. ### Its format is identical to that of mod_authz_svn authorization ### files. ### As shown below each section defines authorizations for the path and ### (optional) repository specified by the section name. ### The authorizations follow. An authorization line can refer to: ### - a single user, ### - a group of users defined in a special [groups] section, ### - an alias defined in a special [aliases] section, ### - all authenticated users, using the "$authenticated" token, ### - only anonymous users, using the "$anonymous" token, ### - anyone, using the "*" wildcard. ### A match can be inverted by prefixing the rule with "~". Rules can ### grant read ("r") access, read-write ("rw") access, or no access ### (""). [aliases] # joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average [groups] # harry_and_sally = harry,sally # harry_sally_and_joe = harry,sally, joe # [/foo/bar] # harry = rw # joe = r # * = # [repository:/baz/fuz] # @harry_and_sally = rw # * = r user1=rw user2=r ~
4、配置svnserve.conf
[root@localhost conf]# vim svnserve.conf ### This file controls the configuration of the svnserve daemon, if you ### use it to allow access to this repository. (If you only allow ### access through http: and/or file: URLs, then this file is ### irrelevant.) ### Visit http://subversion.apache.org/ for more information. [general] ### The anon-access and auth-access options control access to the ### repository for unauthenticated (a.k.a. anonymous) users and ### authenticated users, respectively. ### Valid values are "write", "read", and "none". ### Setting the value to "none" prohibits both reading and writing; ### "read" allows read-only access, and "write" allows complete ### read/write access to the repository. ### The sample settings below are the defaults and specify that anonymous ### users have read-only access to the repository, while authenticated ### users have read and write access to the repository. anon-access = read auth-access = write ### The password-db option controls the location of the password ### database file. Unless you specify a path starting with a /, ### the file"s location is relative to the directory containing ### this configuration file. ### If SASL is enabled (see below), this file will NOT be used. ### Uncomment the line below to use the default password file. password-db = passwd ### The authz-db option controls the location of the authorization ### rules for path-based access control. Unless you specify a path ### starting with a /, the file"s location is relative to the the ### directory containing this file. If you don"t specify an ### authz-db, no path-based access control is done. ### Uncomment the line below to use the default authorization file. authz-db = authz ### This option specifies the authentication realm of the repository. ### If two repositories have the same authentication realm, they should ### have the same password database, and vice versa. The default realm ### is repository"s uuid. # realm = My First Repository realm = /home/svn ### The force-username-case option causes svnserve to case-normalize ### usernames before comparing them against the authorization rules in the ### authz-db file configured above. Valid values are "upper" (to upper- ### case the usernames), "lower" (to lowercase the usernames), and ### "none" (to compare usernames as-is without case conversion, which ### is the default behavior). # force-username-case = none [sasl] ### This option specifies whether you want to use the Cyrus SASL ### library for authentication. Default is false. ### This section will be ignored if svnserve is not built with Cyrus
最后一行的realm记得改成你的svn目录
打开注释时切记前面不要留有空格
三、启动与停止
[root@localhost conf]# svnserve -d -r /home/svn(启动) [root@localhost conf]#kill all svnserve(停止)
本篇文章到此结束,如果您有相关技术方面疑问可以联系我们技术人员远程解决,感谢大家支持本站!
我想要获取技术服务或软件
服务范围:MySQL、ORACLE、SQLSERVER、MongoDB、PostgreSQL 、程序问题
服务方式:远程服务、电话支持、现场服务,沟通指定方式服务
技术标签:数据恢复、安装配置、数据迁移、集群容灾、异常处理、其它问题
本站部分文章参考或来源于网络,如有侵权请联系站长。
数据库远程运维 Linux下安装SVN服务端的方法步骤
相关文章
- 版本Linux查看内核版本的方法(linux怎么查看内核)
- 地址Linux下的自动获取网络地址技术(linux自动获取网络)
- 如何在Linux系统中查看进程的父进程(linux查看进程父进程)
- 创建Linux新文件夹:一步一步来!(linux新建目录)
- 安装Linux下的PHP环境(linux中安装php)
- 系统监控 Linux 系统:不容忽视的重要环节(监控linux)
- Linux系统:改变背景色的简单方法(linux背景颜色)
- Linux下解压.7z文件的方法(.7z解压linux)
- Linux系统中安全移除模块的方法(linux移除模块)
- Linux多默认网关:使用方法简介(linux多默认网关)
- Linux下导出环境变量的简便方法(linux导出环境变量)
- Linux安装证书:一步一步操作指南(linux安装证书)
- Linux多线程之间信息传递实践(linux多线程通讯)
- Linux下如何安装软件(linux下怎么安装软件)
- Linux下配置Java开发环境的指南(linux配置java环境)
- Linux下读取串口数据的实现方法(linux读串口)
- Linux查看命令路径:一个轻松简单的方法。(linux查看命令路径)
- 开启新维度:Linux下的XV技术(xv linux)
- Linux下使用备份命令实现数据安全(linux下备份命令)
- Linux下快速安装R语言的指南(linux安装r语言)
- Linux下查看MySQL账户密码实现方法(linux查看mysql密码)