zl程序教程

您现在的位置是:首页 >  系统

当前栏目

Linux(程序设计):55—非阻塞connect(EINPROGRESS)「建议收藏」

Linux 建议 收藏 阻塞 程序设计 connect 55 EINPROGRESS
2023-06-13 09:12:17 时间

大家好,又见面了,我是你们的朋友全栈君。

一、非阻塞connect概述

man手册

  • connect的man手册有如下一段内容:

EINPROGRESS The socket is nonblocking and the connection cannot be completed immediately. It is possible to select(2) or poll(2) for com‐pletion by selecting the socket for writing. After select(2) indicates writability, use getsockopt(2) to read the SO_ERROR option at level SOL_SOCKET to determine whether connect() completed successfully (SO_ERROR is zero) or unsuccessfully (SO_ERROR is one of the usual error codes listed here, explaining the reason for the failure).

  • 解析文档,非阻塞connect如何使用:
    • ①当我们将sock设置为非阻塞之后,使用connect去连接服务端,即使服务端开启了,connect系统调用也不会连接成功,connect而是以失败告终,并返回错误
    • ②但是非阻塞connect返回的错误是有讲究的:
      • 如果非阻塞connect返回的错误是EINPROGRESS,代表不是connect系统调用出错了,而是connect可能会在后面才会建立完整地连接(只是当前连接还没有建立完整),所以我们可以在通过给select、pol或epoll设置等待时间,来等待这个connect的连接成功,从而进一步处理
      • 如果非阻塞connect返回的错误不是EINPROGRESS,代表就是connect系统调用本身出错了,那么就可以做一些相应的错误处理了
    • ③当非阻塞connect以EINPROGRESS错误返回之后,我们可以给select、pol或epoll设置等待时间,并将客户端封装在等待可写的结构中,进一步来等待非阻塞connect客户端与服务端建立完整地连接,在等待的过程中,如果非阻塞connect建立成功了,客户端的sock_fd就会变成可写的(这个在本人的IO复用文章中介绍过,见下图)
    • ④当非阻塞connect建立成功之后还可以利用getsockopt来读取错误码并清除该socket上的错误:
      • 如果错误码为0,表示连接成功建立
      • 否则连接失败

二、非阻塞connect的移植性问题

  • 移植性问题如下:
    • 1.首先,非阻塞的socket可能导致connect始终失败
    • 2.其次,select对处于EINPROGRESS状态下的socket可能不起作用
    • 3.最后,对于出错的socket,getsockopt在有些系统(比如Linux)上返回-1,而在有些系统上(比如源自伯克利的UNIX)返回0
  • 这些问题没有一个统一的解决办法

三、编码演示案例

#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#include <unistd.h>
#include <strings.h>
#include <libgen.h> //for basename
#include <fcntl.h>
#include <sys/socket.h>
#include <sys/types.h>
#include <time.h>
#include <sys/select.h>
#include <arpa/inet.h>


int setnonblocking(int fd);

int set_nonblocking_connect(const char* ip,const char* port,int time);

int main(int argc,char *argv[])
{
    //must write ip and port
    if(argc<3){
        printf("usage:./%s [ip] [port]\n",basename(argv[0]));
        exit(EXIT_FAILURE);
    }

    int cli_fd;
    if((cli_fd=set_nonblocking_connect(argv[1],argv[2],10))==-1) 
        exit(EXIT_FAILURE);

    sleep(10);
    close(cli_fd);
    exit(EXIT_SUCCESS);
}

/*****************************************************************************
 函 数 名  : setnonblocking
 功能描述  : 将参数所指的fd设置为非阻塞
 输入参数  : int fd  
 输出参数  : 无
 返 回 值  : int
            失败退出程序,成功返回fd的旧标志
 调用函数  : 
 被调函数  : 
 
 修改历史      :
  1.日    期   : 2019年12月23日
    作    者   : 江南_董少
    修改内容   : 新生成函数

*****************************************************************************/
int setnonblocking(int fd)
{
    int old_options=fcntl(fd,F_GETFL);
    int new_options=old_options|O_NONBLOCK;

    if(fcntl(fd,F_SETFL,new_options)==-1){
        perror("fcntl");
        exit(EXIT_FAILURE);
    }
    return old_options;
}

/*****************************************************************************
 函 数 名  : set_nonblocking_connect
 功能描述  : 
 输入参数  : const char* ip  
             int port        
             int time        
 输出参数  : 无
 返 回 值  : int
 调用函数  : 
 被调函数  : 
 
 修改历史      :
  1.日    期   : 2019年12月23日
    作    者   : 江南_董少
    修改内容   : 新生成函数

*****************************************************************************/
int set_nonblocking_connect(const char* ip,const char* port,int time)
{
    int sock_fd,old_options,ret_val;
    struct sockaddr_in serAddress;

    //socket
    if((sock_fd=socket(AF_INET,SOCK_STREAM,0))==-1){
        perror("socket");
        exit(EXIT_FAILURE);
    }

    //set nonblock
    old_options=setnonblocking(sock_fd);

    //init address
    bzero(&serAddress,sizeof(serAddress));
    serAddress.sin_family=AF_INET;
    serAddress.sin_port=htons(atoi(port));
    if(inet_pton(AF_INET,ip,&serAddress.sin_addr.s_addr)==-1){
        perror("inet_pton");
        exit(EXIT_FAILURE);
    }

    //connect

    //nonblocking connect success,return sock_fd
    if((ret_val=connect(sock_fd,(struct sockaddr*)&serAddress,sizeof(serAddress)))==0){
        printf("connect with server suucess\n");

        //set fd block and return
        if(fcntl(sock_fd,F_SETFL,old_options)==-1){
            perror("fcntl");
            exit(EXIT_FAILURE);
        }
        
        return sock_fd;
    }
    
    //nonblocking connect error
    else if(errno!=EINPROGRESS){
        printf("unblock connect not support\n");
        return -1;
    }

    fd_set readfds;
    fd_set writefds;
    struct timeval timeout;

    FD_ZERO(&readfds);
    FD_ZERO(&writefds);
    timeout.tv_sec=time;
    timeout.tv_usec=0;

    ret_val=select(sock_fd+1,NULL,&writefds,NULL,&timeout);
    if(ret_val<=0){
        //select error or timeout,return
        printf("connection time out\n");
        close(sock_fd);
        return -1;
    }

    //nonblocking connect fd is not ready write,return
    if(!FD_ISSET(sock_fd,&writefds)){
        printf("no events on sock_fd found\n");
        close(sock_fd);
        return -1;
    }

    int error=0;
    socklen_t length=sizeof(error);
    //get error and save to error
    if(getsockopt(sock_fd,SOL_SOCKET,SO_ERROR,&error,&length)==-1){
        perror("getsockopt");
        exit(EXIT_FAILURE);
    }
    //error is not 0,meaning connect error
    if(error!=0){
        printf("connect failed after select with the error:%d\n",error);
        close(sock_fd);
        return -1;
    }

    //connect success
    printf("connect ready after select with the socket:%d\n",sock_fd);
    //set fd block and return
    fcntl(sock_fd,F_SETFL,old_options);
    return sock_fd;
}

测试①

  • 我们使用程序去连接8888端口的服务器,但是服务器未开启,select等待10秒之后超时退出

测试②

  • 这个测试中,我们的服务器开启了8888监听端口
  • 我们客户端程序connect没有执行成功,但是返回了EINPROGRESS错误。于是在后面的select中等待非阻塞connect建立成功并且客户端fd变为可写的。接着消除错误编码并打印相关提示信息

发布者:全栈程序员栈长,转载请注明出处:https://javaforall.cn/160529.html原文链接:https://javaforall.cn