【FFmpeg】ffmpeg 命令查询三 ( 查询 ffmpeg 命令分类支持的参数 )
命令 查询 参数 支持 分类 FFMPEG
2023-09-27 14:28:11 时间
FFmpeg 系列文章目录
【FFmpeg】Windows 搭建 FFmpeg 命令行运行环境
【FFmpeg】FFmpeg 相关术语简介 ( 容器 | 媒体流 | 数据帧 | 数据包 | 编解码器 | 复用 | 解复用 )
【FFmpeg】FFmpeg 相关术语简介 二
【FFmpeg】FFmpeg 帮助文档使用
【FFmpeg】使用 FFmpeg 处理音视频格式转换流程 ( 解复用 | 解码 | 帧处理 | 编码 | 复用 )
【FFmpeg】ffmpeg 命令查询一 ( 版本 | 编译配置 | 复用格式 | 编解码器 )
【FFmpeg】ffmpeg 命令查询二 ( 比特流过滤器 | 可用协议 | 过滤器 | 像素格式 | 标准声道布局 | 音频采样格式 | 颜色名称 )
【FFmpeg】ffmpeg 命令查询三 ( 查询 ffmpeg 命令分类支持的参数 )
文章目录
一、查看具体的 ffmpeg 命令分类所支持的参数
查看具体的 ffmpeg 命令分类所支持的参数语法如下 :
ffmpeg -h 参数类型=参数名称
参数类型 指的是下面的参数去掉 s 之后的字符串 , 如 " 显示可用的复用器 " 对应的 参数类型 是 muxer ;
-formats show available formats // 显示可用格式 , 其等价于 muxers + demuxers 组合
-muxers show available muxers // 显示可用的复用器
-demuxers show available demuxers // 显示可用的解复用器
-devices show available devices // 显示可用设备
-codecs show available codecs // 显示可用的编解码器 , 其等价于 encoders + decoders 组合
-decoders show available decoders // 显示可用的解码器
-encoders show available encoders // 显示可用的编码器
-bsfs show available bit stream filters // 显示可用的比特流 filters 过滤器
-protocols show available protocols // 显示可用协议 , 如 rtmp , rtsp 等 ;
-filters show available filters // 显示可用的过滤器 , 可用于 : 改变播放速度 , 加水印 , 加 Logo
-pix_fmts show available pixel formats // 显示可用的像素格式
-layouts show standard channel layouts // 显示标准声道名称
-sample_fmts show available audio sample formats // 显示可用的音频采样格式
-colors show available color names // 显示可用的颜色名称
-sources device list sources of the input device // 列出输入设备来源
-sinks device list sinks of the output device // 列出输出设备接收器
-hwaccels show available HW acceleration methods // 显示可用的硬件加速方法
二、查询 " 复用器 " 类型 设置 flv 视频格式时 所支持的参数
查询 " 复用器 " 类型 设置 flv 视频格式时 所支持的参数 的 命令 : 如果在命令中使用了 flv 视频 , 其解复用器可以设置的参数类型 ;
ffmpeg -h muxer=flv
执行过程 : 打印出的 flv 视频格式支持的解复用器 ;
命令行输出 :
D:\ffmpeg>ffmpeg -h muxer=flv
ffmpeg version n4.4-19-g8d172d9409 Copyright (c) 2000-2021 the FFmpeg developers
built with gcc 10-win32 (GCC) 20210408
configuration: --prefix=/ffbuild/prefix --pkg-config-flags=--static --pkg-config=pkg-config --cross-prefix=x86_64-w64-mingw32- --arch=x86_64 --target-os=mingw32 --enable-gpl --enable-version3 --disable-debug --enable-shared --disable-static --disable-w32threads --enable-pthreads --enable-iconv --enable-libxml2 --enable-zlib --enable-libfreetype --enable-libfribidi --enable-gmp --enable-lzma --enable-fontconfig --enable-libvorbis --enable-opencl --enable-libvmaf --enable-vulkan --enable-amf --enable-libaom --enable-avisynth --enable-libdav1d --enable-libdavs2 --enable-ffnvcodec --enable-cuda-llvm --enable-libglslang --enable-libgme --enable-libass --enable-libbluray --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvpx --enable-libwebp --enable-lv2 --enable-libmfx --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librav1e --enable-librubberband --enable-schannel --enable-sdl2 --enable-libsoxr --enable-libsrt --enable-libsvtav1 --enable-libtwolame --enable-libuavs3d --enable-libvidstab --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libzimg --extra-cflags=-DLIBTWOLAME_STATIC --extra-cxxflags= --extra-ldflags=-pthread --extra-ldexeflags= --extra-libs=-lgomp
libavutil 56. 70.100 / 56. 70.100
libavcodec 58.134.100 / 58.134.100
libavformat 58. 76.100 / 58. 76.100
libavdevice 58. 13.100 / 58. 13.100
libavfilter 7.110.100 / 7.110.100
libswscale 5. 9.100 / 5. 9.100
libswresample 3. 9.100 / 3. 9.100
libpostproc 55. 9.100 / 55. 9.100
Muxer flv [FLV (Flash Video)]:
Common extensions: flv.
Mime type: video/x-flv.
Default video codec: flv1.
Default audio codec: mp3.
flv muxer AVOptions:
-flvflags <flags> E.......... FLV muxer flags (default 0)
aac_seq_header_detect E.......... Put AAC sequence header based on stream data
no_sequence_end E.......... disable sequence end for FLV
no_metadata E.......... disable metadata for FLV
no_duration_filesize E.......... disable duration and filesize zero value metadata for FLV
add_keyframe_index E.......... Add keyframe index metadata
D:\ffmpeg>
三、查询 " 过滤器 " 类型设置 atempo 时所支持的参数
查询 " 过滤器 " 类型设置 atempo 时所支持的参数 的 命令 : 如果在命令中使用了 修改视频速率的 过滤器 , 可以设置的参数类型 ;
ffmpeg -h filter=atempo
执行过程 : 打印出设置 atempo 过滤器时可以设置的参数 ;
命令行输出 :
D:\ffmpeg>ffmpeg -h filter=atempo
ffmpeg version n4.4-19-g8d172d9409 Copyright (c) 2000-2021 the FFmpeg developers
built with gcc 10-win32 (GCC) 20210408
configuration: --prefix=/ffbuild/prefix --pkg-config-flags=--static --pkg-config=pkg-config --cross-prefix=x86_64-w64-mingw32- --arch=x86_64 --target-os=mingw32 --enable-gpl --enable-version3 --disable-debug --enable-shared --disable-static --disable-w32threads --enable-pthreads --enable-iconv --enable-libxml2 --enable-zlib --enable-libfreetype --enable-libfribidi --enable-gmp --enable-lzma --enable-fontconfig --enable-libvorbis --enable-opencl --enable-libvmaf --enable-vulkan --enable-amf --enable-libaom --enable-avisynth --enable-libdav1d --enable-libdavs2 --enable-ffnvcodec --enable-cuda-llvm --enable-libglslang --enable-libgme --enable-libass --enable-libbluray --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvpx --enable-libwebp --enable-lv2 --enable-libmfx --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librav1e --enable-librubberband --enable-schannel --enable-sdl2 --enable-libsoxr --enable-libsrt --enable-libsvtav1 --enable-libtwolame --enable-libuavs3d --enable-libvidstab --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libzimg --extra-cflags=-DLIBTWOLAME_STATIC --extra-cxxflags= --extra-ldflags=-pthread --extra-ldexeflags= --extra-libs=-lgomp
libavutil 56. 70.100 / 56. 70.100
libavcodec 58.134.100 / 58.134.100
libavformat 58. 76.100 / 58. 76.100
libavdevice 58. 13.100 / 58. 13.100
libavfilter 7.110.100 / 7.110.100
libswscale 5. 9.100 / 5. 9.100
libswresample 3. 9.100 / 3. 9.100
libpostproc 55. 9.100 / 55. 9.100
Filter atempo
Adjust audio tempo.
Inputs:
#0: default (audio)
Outputs:
#0: default (audio)
atempo AVOptions:
tempo <double> ..F.A....T. set tempo scale factor (from 0.5 to 100) (default 1)
D:\ffmpeg>
查询结果 : 可设置 tempo 参数 , 配速取值范围从 0.5 0.5 0.5 ~ 100 100 100 , 默认为 1 1 1 ;
atempo AVOptions:
tempo <double> ..F.A....T. set tempo scale factor (from 0.5 to 100) (default 1)
四、查询 " 编码器 " 类型设置 libx264 时所支持的参数
查询 " 编码器 " 类型设置 libx264 时所支持的参数 的 命令 : 如果在命令中使用了 libx264 编码器 , 可以设置的参数类型 ;
ffmpeg -h encoder=libx264
执行过程 : 打印出设置 atempo 过滤器时可以设置的参数 ;
命令行输出 :
D:\ffmpeg>ffmpeg -h encoder=libx264
ffmpeg version n4.4-19-g8d172d9409 Copyright (c) 2000-2021 the FFmpeg developers
built with gcc 10-win32 (GCC) 20210408
configuration: --prefix=/ffbuild/prefix --pkg-config-flags=--static --pkg-config=pkg-config --cross-prefix=x86_64-w64-mingw32- --arch=x86_64 --target-os=mingw32 --enable-gpl --enable-version3 --disable-debug --enable-shared --disable-static --disable-w32threads --enable-pthreads --enable-iconv --enable-libxml2 --enable-zlib --enable-libfreetype --enable-libfribidi --enable-gmp --enable-lzma --enable-fontconfig --enable-libvorbis --enable-opencl --enable-libvmaf --enable-vulkan --enable-amf --enable-libaom --enable-avisynth --enable-libdav1d --enable-libdavs2 --enable-ffnvcodec --enable-cuda-llvm --enable-libglslang --enable-libgme --enable-libass --enable-libbluray --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvpx --enable-libwebp --enable-lv2 --enable-libmfx --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librav1e --enable-librubberband --enable-schannel --enable-sdl2 --enable-libsoxr --enable-libsrt --enable-libsvtav1 --enable-libtwolame --enable-libuavs3d --enable-libvidstab --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libzimg --extra-cflags=-DLIBTWOLAME_STATIC --extra-cxxflags= --extra-ldflags=-pthread --extra-ldexeflags= --extra-libs=-lgomp
libavutil 56. 70.100 / 56. 70.100
libavcodec 58.134.100 / 58.134.100
libavformat 58. 76.100 / 58. 76.100
libavdevice 58. 13.100 / 58. 13.100
libavfilter 7.110.100 / 7.110.100
libswscale 5. 9.100 / 5. 9.100
libswresample 3. 9.100 / 3. 9.100
libpostproc 55. 9.100 / 55. 9.100
Encoder libx264 [libx264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10]:
General capabilities: delay threads
Threading capabilities: other
Supported pixel formats: yuv420p yuvj420p yuv422p yuvj422p yuv444p yuvj444p nv12 nv16 nv21 yuv420p10le yuv422p10le yuv444p10le nv20le gray gray10le
libx264 AVOptions:
-preset <string> E..V....... Set the encoding preset (cf. x264 --fullhelp) (default "medium")
-tune <string> E..V....... Tune the encoding params (cf. x264 --fullhelp)
-profile <string> E..V....... Set profile restrictions (cf. x264 --fullhelp)
-fastfirstpass <boolean> E..V....... Use fast settings when encoding first pass (default true)
-level <string> E..V....... Specify level (as defined by Annex A)
-passlogfile <string> E..V....... Filename for 2 pass stats
-wpredp <string> E..V....... Weighted prediction for P-frames
-a53cc <boolean> E..V....... Use A53 Closed Captions (if available) (default true)
-x264opts <string> E..V....... x264 options
-crf <float> E..V....... Select the quality for constant quality mode (from -1 to FLT_MAX) (default -1)
-crf_max <float> E..V....... In CRF mode, prevents VBV from lowering quality beyond this point. (from -1 to FLT_MAX) (default -1)
-qp <int> E..V....... Constant quantization parameter rate control method (from -1 to INT_MAX) (default -1)
-aq-mode <int> E..V....... AQ method (from -1 to INT_MAX) (default -1)
none 0 E..V.......
variance 1 E..V....... Variance AQ (complexity mask)
autovariance 2 E..V....... Auto-variance AQ
autovariance-biased 3 E..V....... Auto-variance AQ with bias to dark scenes
-aq-strength <float> E..V....... AQ strength. Reduces blocking and blurring in flat and textured areas. (from -1 to FLT_MAX) (default -1)
-psy <boolean> E..V....... Use psychovisual optimizations. (default auto)
-psy-rd <string> E..V....... Strength of psychovisual optimization, in <psy-rd>:<psy-trellis> format.
-rc-lookahead <int> E..V....... Number of frames to look ahead for frametype and ratecontrol (from -1 to INT_MAX) (default -1)
-weightb <boolean> E..V....... Weighted prediction for B-frames. (default auto)
-weightp <int> E..V....... Weighted prediction analysis method. (from -1 to INT_MAX) (default -1)
none 0 E..V.......
simple 1 E..V.......
smart 2 E..V.......
-ssim <boolean> E..V....... Calculate and print SSIM stats. (default auto)
-intra-refresh <boolean> E..V....... Use Periodic Intra Refresh instead of IDR frames. (default auto)
-bluray-compat <boolean> E..V....... Bluray compatibility workarounds. (default auto)
-b-bias <int> E..V....... Influences how often B-frames are used (from INT_MIN to INT_MAX) (default INT_MIN)
-b-pyramid <int> E..V....... Keep some B-frames as references. (from -1 to INT_MAX) (default -1)
none 0 E..V.......
strict 1 E..V....... Strictly hierarchical pyramid
normal 2 E..V....... Non-strict (not Blu-ray compatible)
-mixed-refs <boolean> E..V....... One reference per partition, as opposed to one reference per macroblock (default auto)
-8x8dct <boolean> E..V....... High profile 8x8 transform. (default auto)
-fast-pskip <boolean> E..V....... (default auto)
-aud <boolean> E..V....... Use access unit delimiters. (default auto)
-mbtree <boolean> E..V....... Use macroblock tree ratecontrol. (default auto)
-deblock <string> E..V....... Loop filter parameters, in <alpha:beta> form.
-cplxblur <float> E..V....... Reduce fluctuations in QP (before curve compression) (from -1 to FLT_MAX) (default -1)
-partitions <string> E..V....... A comma-separated list of partitions to consider. Possible values: p8x8, p4x4, b8x8, i8x8, i4x4, none, all
-direct-pred <int> E..V....... Direct MV prediction mode (from -1 to INT_MAX) (default -1)
none 0 E..V.......
spatial 1 E..V.......
temporal 2 E..V.......
auto 3 E..V.......
-slice-max-size <int> E..V....... Limit the size of each slice in bytes (from -1 to INT_MAX) (default -1)
-stats <string> E..V....... Filename for 2 pass stats
-nal-hrd <int> E..V....... Signal HRD information (requires vbv-bufsize; cbr not allowed in .mp4) (from -1 to INT_MAX) (default -1)
none 0 E..V.......
vbr 1 E..V.......
cbr 2 E..V.......
-avcintra-class <int> E..V....... AVC-Intra class 50/100/200 (from -1 to 200) (default -1)
-me_method <int> E..V....... Set motion estimation method (from -1 to 4) (default -1)
dia 0 E..V.......
hex 1 E..V.......
umh 2 E..V.......
esa 3 E..V.......
tesa 4 E..V.......
-motion-est <int> E..V....... Set motion estimation method (from -1 to 4) (default -1)
dia 0 E..V.......
hex 1 E..V.......
umh 2 E..V.......
esa 3 E..V.......
tesa 4 E..V.......
-forced-idr <boolean> E..V....... If forcing keyframes, force them as IDR frames. (default false)
-coder <int> E..V....... Coder type (from -1 to 1) (default default)
default -1 E..V.......
cavlc 0 E..V.......
cabac 1 E..V.......
vlc 0 E..V.......
ac 1 E..V.......
-b_strategy <int> E..V....... Strategy to choose between I/P/B-frames (from -1 to 2) (default -1)
-chromaoffset <int> E..V....... QP difference between chroma and luma (from INT_MIN to INT_MAX) (default 0)
-sc_threshold <int> E..V....... Scene change threshold (from INT_MIN to INT_MAX) (default -1)
-noise_reduction <int> E..V....... Noise reduction (from INT_MIN to INT_MAX) (default -1)
-x264-params <dictionary> E..V....... Override the x264 configuration using a :-separated list of key=value parameters
D:\ffmpeg>
五、查询命令设置项以及具体参数
想要对一个视频进行编码操作 , 查询编码器 , 如只知道 264 , 不知道具体的编码器名称 , 先使用如下名称 , 查询到具体的编码器名称 ;
ffmpeg -encoders | findstr 264
查询结果是 V..... libx264 libx264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (codec h264) , 编码器的名称是 libx264 ;
D:\ffmpeg>ffmpeg -encoders | findstr 264
ffmpeg version n4.4-19-g8d172d9409 Copyright (c) 2000-2021 the FFmpeg developers
built with gcc 10-win32 (GCC) 20210408
configuration: --prefix=/ffbuild/prefix --pkg-config-flags=--static --pkg-config=pkg-config --cross-prefix=x86_64-w64-mingw32- --arch=x86_64 --target-os=mingw32 --enable-gpl --enable-version3 --disable-debug --enable-shared --disable-static --disable-w32threads --enable-pthreads --enable-iconv --enable-libxml2 --enable-zlib --enable-libfreetype --enable-libfribidi --enable-gmp --enable-lzma --enable-fontconfig --enable-libvorbis --enable-opencl --enable-libvmaf --enable-vulkan --enable-amf --enable-libaom --enable-avisynth --enable-libdav1d --enable-libdavs2 --enable-ffnvcodec --enable-cuda-llvm --enable-libglslang --enable-libgme --enable-libass --enable-libbluray --enable-libmp3lame --enable-libopus --enable-libtheora --enable-libvpx --enable-libwebp --enable-lv2 --enable-libmfx --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librav1e --enable-librubberband --enable-schannel --enable-sdl2 --enable-libsoxr --enable-libsrt --enable-libsvtav1 --enable-libtwolame --enable-libuavs3d --enable-libvidstab --enable-libx264 --enable-libx265 --enable-libxavs2 --enable-libxvid --enable-libzimg --extra-cflags=-DLIBTWOLAME_STATIC --extra-cxxflags= --extra-ldflags=-pthread --extra-ldexeflags= --extra-libs=-lgomp
libavutil 56. 70.100 / 56. 70.100
libavcodec 58.134.100 / 58.134.100
libavformat 58. 76.100 / 58. 76.100
libavdevice 58. 13.100 / 58. 13.100
libavfilter 7.110.100 / 7.110.100
libswscale 5. 9.100 / 5. 9.100
libswresample 3. 9.100 / 3. 9.100
libpostproc 55. 9.100 / 55. 9.100
V..... libx264 libx264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (codec h264)
V..... libx264rgb libx264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 RGB (codec h264)
V....D h264_amf AMD AMF H.264 Encoder (codec h264)
V....D h264_mf H264 via MediaFoundation (codec h264)
V....D h264_nvenc NVIDIA NVENC H.264 encoder (codec h264)
V..... h264_qsv H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (Intel Quick Sync Video acceleration) (codec h264)
V..... nvenc NVIDIA NVENC H.264 encoder (codec h264)
V..... nvenc_h264 NVIDIA NVENC H.264 encoder (codec h264)
D:\ffmpeg>
然后查询如果编码器设置为 libx264 都需要设置哪些参数 ;
使用
ffmpeg -h encoder=libx264
命令即可查询 libx264 编码器的详细参数设置 ;
相关文章
- centos7.9打开进程的最大句柄数的命令
- Linux基础知识第二讲,文件目录命令使用
- linux命令查询大全
- bat命令查询硬件信息
- sqlalchemy 查询命令
- ES 常用Linux查询命令汇总
- 教你用CMD命令查询域名的DNS解析记录:A,NS,MX,CNAME,TXT
- 安全专家警告：黑客或能命令性爱机器人杀死人类主人
- MySQL锁定状态查看命令
- MTR命令详解
- linux grep命令
- Docker（22）- docker diff 命令详解
- Linux 系统版本查询命令
- linux日志常用查询命令
- Linux continue 命令
- ffmpeg一些filter用法、以及一些功能命令
- shell 命令使用笔记
- 12个Linux进程管理命令介绍