spoolight on oracle 配置

spoolight

seting 1
ORACLE_HOME=D:\oracle\product\11.2.0\client_1
set SQLPATH=D:\oracle\product\11.2.0\client_1
set LOCAL=D:\oracle\product\11.2.0\client_1
set LD_LIBRARY_PATH=D:\oracle\product\11.2.0\client_1

D:\oracle\product\11.2.0\client_1\bin;D:\oracle\product\11.2.0\client_1

D:\Quest Software

setting 2
cop could not be uninstall
datasourcesqlnet could not be uninstalleed
spotlightportals could not be uninstalleed
datasourceppcm could not be uninstall
datasourceRAC could not be uninstall
SOC
datasourcesqlnet
spotlighportals

setting 3

cd D:\支持\办公软件\oracle10201_client_win32\client

If you have 64-bit server and 32-bit client installed on the same computer it's possible that Spotlight looks for oci.dll at wrong Oracle Home.

Examine order of Oracle home directories from Universal Installer and place 32-bit home first:

Run Oracle Universal Installer
Click "Installed Products" button
Switch to "Environment" tab
Reorder Oracle Homes with arrows on right side and click "Apply"

setting 4:
C:\Program Files\Quest Software\Spotlight\Console\Spotlight.exe /developer:1

setting 5
C:\dbmonitor

D:\Quest Software

setting 6

C:\Users\penghuishun.CRBCOA\AppData\Local\VirtualStore\Program Files (x86)\Quest Software
C:\Users\penghuishun.CRBCOA\AppData\Roaming

setting 7
sqlplus hddtusr/hddtusr_0824@//192.168.27.145:15021/phddtuat

sqlplus systme/manager@//10.241.96.37:1556/vats

setting 8

regedit

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\AutoShareServer

net use \\R304AH9E\c$

1. Restore the administrative share for C$. See Microsoft document http://support.microsoft.com/kb/314984

2. Check that it is ok:
- net use \\<hostname>\c$ should work
- the current user (i.e. user in administrator group) should have all privileges on the default share

3. retry the installation

5.ignore the error

6.log:
D:\oracle\product\11.2.0\client_1\cfgtoollogs\oui

ref
http://blog.csdn.net/msdnchina/article/details/43878995

##seting 7

C:\Program Files (x86)\Oracle\Inventory\logs

###########
Well, interesting. I figured out what was going wrong. From the Connection Manager, the Installed Clients | Connect Using was defaulting to the Oracle 6i Report/Forms home. Once I selected the 11g home, presto. Usually the products select by default the home which is first listed in the system PATH and uses connections from what is specified by the TNS_ADMIN system variable. Thanks Vincent for helping!

###seting 9

set TNS_ADMIN=D:\oracle\product\11.2.0\client_1\network\admin
set NLS_LANG=AMERICAN_AMERICA.ZHS16GBK
set ocidll=D:\oracle\product\11.2.0\client_1\oci.dll

regedit
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ORACLE\KEY_OraClient11g_home1

######seting 10
D:\oracle\product\11.2.0\client_1>tnsping

TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 11-JAN-2
018 20:35:22

Copyright (c) 1997, 2010, Oracle. All rights reserved.

########setting 11

https://www.club-oracle.com/threads/cannot-load-oci-dll.3178/

Cannot load OCI DLL
Discussion in 'Other Development Tools' started by mdsmit, Oct 6, 2010.

mdsmit
mdsmit
Active Member
Messages:5
Likes Received:0
Trophy Points:55
I am setting up tools on a new Windows 7 PC that my company issued me and have everything working except TOAD.

I installed oracle 10.2.0.3 on my PC and setup my ORACLE_HOME and TNS_ADMIN environment variables. I also set up by TNS file and host file. Afterwards I installed TOAD 10.1.1.8 as well as SQL Developer.

I am able to connect to any database setup in my TNS file through SQL plus as well as through SQL Developer. But when I open TOAD, my oracle instalation is not appearing in the "Connect Using:" box when I try to make a connection. The only thing that appears there is an old installion of oracle 8 that was partially copied over when the tech staff copied files from my old PC to my new one. That installition is invalid and doesn't work.

I looked through the TOAD user guide, and it has the following information about how it finds clients:

How Toad Finds the Oracle Client DLL
1. Toad first looks in the Toad command line for OCIDLL.
2. If this is not found, Toad looks for the path for the Oracle home as follows:
3. If the command line argument "ORACLEHOME" was passed in, then Toad will use
that home.
4. If there is no Toad home defined then Toad will display the home that is set as the
default home using Oracle’s Home Selector application as the default in the dropdown.
Toad will use the home that is active in the dropdown.
5. To populate the dropdown, Toad searches the registry as follows:
First, Toad reads the list of Oracle home names from the keys under HKEY_
LOCAL_MACHINE\SOFTWARE\ORACLE\ALL_HOMES
If no Oracle homes are found there, then the Oracle home is set to HKEY_
LOCAL_MACHINE\SOFTWARE\ORACLE
Otherwise, Toad finds the ORACLE_HOME value for each Oracle home, if it
exists. Then Toad checks the system environment variable called PATH to see
whether it contains the "bin" folder under ORACLE_HOME. Toad selects the
Oracle home whose path appears first in PATH.
If Toad still hasn't found an Oracle home, it uses HKEY_LOCAL_
MACHINE\SOFTWARE\ORACLE.
6. Toad looks for the client DLL in the "Bin" folder under the path found for the
Oracle home
If that fails, Toad looks for the ORACLE_HOME key under HKEY_LOCAL_
MACHINE\ORACLE\SOFTWARE, and look for the client dll in the "Bin" folder
under that.
If that also fails, Toad looks for the client dll in every \bin directory in PATH.

I checked my registry, and my oracle installion does appear in a 10g folder within HKEY_
LOCAL_MACHINE\SOFTWARE\ORACLE.

What else can I do to try and get TOAD to find my 10g oracle installion?

Thanks for any help you can give.
mdsmit, Oct 6, 2010 #1
mdsmit
mdsmit
Active Member
Messages:5
Likes Received:0
Trophy Points:55
Re: Oracle Instalation Not Appearing in Connect Using Dropdown in TOAD

I was able to partially solve the problem by finding where TOAD was getting that path. I set the correct path, but now it gives the error:

"Cannot load OCI DLL: C:\oracle\product\10.2.0\client_2\BIN\oci.dll"

Even though oci.dll is in that directory. Any ideas as to why it can't load it?
mdsmit, Oct 6, 2010 #2
Sadik
Sadik
Community Moderator Forum Guru
Messages:1,989
Likes Received:252
Trophy Points:1,455
Re: Oracle Instalation Not Appearing in Connect Using Dropdown in TOAD

Ok, which version of Toad are you using?
Sadik, Oct 7, 2010 #3
Sadik
Sadik
Community Moderator Forum Guru
Messages:1,989
Likes Received:252
Trophy Points:1,455
Re: Oracle Instalation Not Appearing in Connect Using Dropdown in TOAD

Oh ok it's 10+. What are the currently values "paths" of the PATH environment variable ?
Sadik, Oct 7, 2010 #4
mdsmit
mdsmit
Active Member
Messages:5
Likes Received:0
Trophy Points:55
I was able to find out the reason why it couldn't load the OCI DLL. Apparently no matter what version of TOAD you have, it is incompatible with 64 bit installations of oracle.

TOAD looks for oracle installations under HKEY_LOCAL_MACHINE/SOFTWARE/WOW6432NODE/ORACLE which is where because that is where 32 bit installations are registered. I had put the path of my 64 bit oracle installation there, but it still doesn't work because TOAD requires a 32 bit installation.

So, I installed a 32 bit version of Oracle, which TOAD was able to find, only to receive a similar error:

"Can't initialize OCI. Error -1"

I was instructed by my tech team at my project to add the following line to my sqlnet.ora file to solve that error, but it didn't:

NAMES.DIRECTORY_PATH= (TNSNAMES)

What DID, get rid of that error was when I ran TOAD as administrator on my PC. But now it gives a TNS error for any DB i try to connect to:

"ORA-12154: TNS:could not resolve the connect identifier specified" and then the DB i was using

However, I am able to connect to these databases with sql plus and sql developer without any issue. And yes, i have my TNS file in my network/admin directory for my new 32 bit installation as well as my 64 bit installation. And when I look at the TNSNames Editor in TOAD it has loaded everything from my TNS file.

Why can it not resolve the database when it has properly loaded it and I can connect with every other tool?
mdsmit, Oct 7, 2010 #5
Sadik
Sadik
Community Moderator Forum Guru
Messages:1,989
Likes Received:252
Trophy Points:1,455
Well it simply means that Toad is unable to find the correct Oracle home through the path variable. That is why i asked you to check the values of PATH environment variables in the first place.
Sadik, Oct 7, 2010 #6
mdsmit
mdsmit
Active Member
Messages:5
Likes Received:0
Trophy Points:55
Path is set to:

"C:\oracle\product\10.2.0\client_3\bin;C:\oracle\product\10.2.0\client_2\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\TortoiseSVN\bin"

The string "C:\oracle\product\10.2.0\client_3\bin" is the bin directory for my 32 bit installation.

The string "C:\oracle\product\10.2.0\client_2\bin" is the bin directory for my 64 bit installation.
mdsmit, Oct 7, 2010 #7
mdsmit
mdsmit
Active Member
Messages:5
Likes Received:0
Trophy Points:55
I found the issue for why I was getting the TNS error:

ORA-12154: TNS:could not resolve the connect identifier specified

Apparently TOAD can't parse program locations that have parenthesis:

http://www.synergys.ca/index.php?option=com_lyftenbloggie&category=installation&Itemid=68&lang=en

Uninstalling TOAD from my "Program Files (x86)" directory and installing it directly in my C: directory solved the issue.

##########follow:

setting 11

checking help/about spotlight/View release notes

it feedback :
Missing "ociw32.dll" file: If Spotlight on Oracle cannot locate the file ociw32.dll, please check that your PATH statement includes a path to the <Oracle>/bin directory.

cp D:\oracle\product\11.2.0\client_1\ociw32.dll to D:\oracle\product\11.2.0\client_1\bin

cp D:\oracle\product\11.2.0\client_1\oci.dll to D:\oracle\product\11.2.0\client_1\bin

setting 12
lost orannzsbb11.dll

cp D:\oracle\product\11.2.0\client_1\orannzsbb11.dllto D:\oracle\product\11.2.0\client_1\bin

setting 13

spotlight on oracle ORA-01017

.安装完Spotlight，进入

-file

-oracle user wizard

(next 后有个下来列表就是刚配置的那些服务列表进行选择,然后用户名与密码,

之后需要SYS用户的用户名与密码)

Spotlight/Spotlight

and use the new user spotlight to monitor

ref 

https://www.cnblogs.com/TestWorld/p/5300843.html

http://blog.csdn.net/defonds/article/details/52936664