Google Earth Engine ——LANDSAT/LC08/C01/T1_ANNUAL_NDVI数据集
This dataset is the atmospherically corrected surface reflectance from the Landsat 8 OLI/TIRS sensors. These images contain 5 visible and near-infrared (VNIR) bands and 2 short-wave infrared (SWIR) bands processed to orthorectified surface reflectance, and two thermal infrared (TIR) bands processed to orthorectified brightness temperature
These data have been atmospherically corrected using LaSRC and includes a cloud, shadow, water and snow mask produced using CFMASK, as well as a per-pixel saturation mask.
Strips of collected data are packaged into overlapping "scenes" covering approximately 170km x 183km using a standardized reference grid.
See also the USGS page on SR QA bands.
SR can only be produced for Landsat assets processed to the L1TP level
Data provider notes:
- Although Surface Reflectance can be processed only from the Operational Land Imager (OLI) bands, SR requires combined OLI/Thermal Infrared Sensor (TIRS) product (LC8) input in order to generate the accompanying cloud mask. Therefore, OLI only (LO8), and TIRS only (LT8) data products cannot be calculated to SR.
- SR is not run for a scene with a solar zenith angle greater than 76°.
- Users are cautioned to avoid using SR for data acquired over high latitudes (> 65°).
- The panchromatic band (ETM+ Band 7, OLI Band 8) is not processed to Surface Reflectance.
- Efficacy of SR correction will be likely reduced in areas where atmospheric correction is affected by adverse conditions:
- Hyper-arid or snow-covered regions
- Low sun angle conditions
- Coastal regions where land area is small relative to adjacent water
- Areas with extensive cloud contamination
This product is generated by Google using a Docker image supplied by USGS.
这个数据集是Landsat 8 OLI/TIRS传感器的大气校正表面反射率。这些图像包含5个可见光和近红外(VNIR)波段和2个短波红外(SWIR)波段,这些波段被处理成正交的表面反射率,还有两个热红外(TIR)波段被处理成正交的亮度温度。
这些数据已经用LaSRC进行了大气校正,包括用CFMASK制作的云、影、水和雪掩码,以及每个像素的饱和掩码。
收集的数据条被打包成重叠的 "场景",使用标准化的参考网格,覆盖大约170公里x183公里。
另见美国地质调查局关于SR质量保证带的网页。
SR只能为处理到L1TP级别的Landsat资产制作。
数据提供者说明。
虽然表面反射率只能从陆地成像仪(OLI)波段中处理,但SR需要OLI/热红外传感器(TIRS)产品(LC8)的综合输入,以生成相应的云层遮挡。因此,只有OLI(LO8)和只有TIRS(LT8)的数据产品不能计算到SR。
对于太阳天顶角大于76°的场景,SR不会被运行。
提醒用户避免对在高纬度地区(>65°)获取的数据使用SR。
全色波段(ETM+波段7,OLI波段8)不处理表面反射率。
在大气校正受到不利条件影响的地区,SR校正的效果将可能降低。
超干旱或被雪覆盖的地区
低太阳角条件
陆地面积相对于邻近水域较小的沿海地区
有大量云层污染的地区
本产品由谷歌使用USGS提供的Docker图像生成。
Dataset Availability
2013-04-11T00:00:00 - 2021-08-29T00:00:00
Dataset Provider
Collection Snippet
ee.ImageCollection("LANDSAT/LC08/C01/T1_SR")
Resolution
30 meters
Bands Table
Name | Description | Units | Wavelength | Scale |
---|---|---|---|---|
B1 | Band 1 (ultra blue) surface reflectance | 0.435-0.451 μm | 0.0001 | |
B2 | Band 2 (blue) surface reflectance | 0.452-0.512 μm | 0.0001 | |
B3 | Band 3 (green) surface reflectance | 0.533-0.590 μm | 0.0001 | |
B4 | Band 4 (red) surface reflectance | 0.636-0.673 μm | 0.0001 | |
B5 | Band 5 (near infrared) surface reflectance | 0.851-0.879 μm | 0.0001 | |
B6 | Band 6 (shortwave infrared 1) surface reflectance | 1.566-1.651 μm | 0.0001 | |
B7 | Band 7 (shortwave infrared 2) surface reflectance | 2.107-2.294 μm | 0.0001 | |
B10 | Band 10 brightness temperature. This band, while originally collected with a resolution of 100m / pixel, has been resampled using cubic convolution to 30m. | Kelvin | 10.60-11.19 μm | 0.1 |
B11 | Band 11 brightness temperature. This band, while originally collected with a resolution of 100m / pixel, has been resampled using cubic convolution to 30m. | Kelvin | 11.50-12.51 μm | 0.1 |
sr_aerosol | Aerosol attributes | 0 | ||
sr_aerosol Bitmask |
| |||
pixel_qa | Pixel quality attributes generated from the CFMASK algorithm. | 0 | ||
pixel_qa Bitmask |
| |||
radsat_qa | Radiometric saturation QA | 0 | ||
radsat_qa Bitmask |
|
影像属性:
Name | Type | Description |
---|---|---|
CLOUD_COVER | Int | Percentage cloud cover, -1 = not calculated. (Obtained from raw Landsat metadata) |
CLOUD_COVER_LAND | Int | Percentage cloud cover over land, -1 = not calculated. (Obtained from raw Landsat metadata) |
EARTH_SUN_DISTANCE | Double | Earth-Sun distance (AU) |
ESPA_VERSION | String | Internal ESPA image version used to compute SR |
GEOMETRIC_RMSE_MODEL | Double | Combined RMSE (Root Mean Square Error) of the geometric residuals (meters) in both across-track and along-track directions. (Obtained from raw Landsat metadata) |
GEOMETRIC_RMSE_MODEL_X | Double | RMSE (Root Mean Square Error) of the geometric residuals (meters) measured on the GCPs (Ground Control Points) used in geometric precision correction in the across-track direction. (Obtained from raw Landsat metadata) |
GEOMETRIC_RMSE_MODEL_Y | Double | RMSE (Root Mean Square Error) of the geometric residuals (meters) measured on the GCPs (Ground Control Points) used in geometric precision correction in the along-track direction. (Obtained from raw Landsat metadata) |
IMAGE_QUALITY | Int | Image quality, 0 = worst, 9 = best, -1 = quality not calculated. (Obtained from raw Landsat metadata) |
LANDSAT_ID | String | Landsat Product Identifier (Collection 1) |
LEVEL1_PRODUCTION_DATE | Int | Date of production for raw Level 1 data as ms since epoch |
PIXEL_QA_VERSION | String | Version of the software used to produce the 'pixel_qa' band |
SATELLITE | String | Name of satellite |
SENSING_TIME | String | Time of the observations as in ISO 8601 string. (Obtained from raw Landsat metadata) |
SOLAR_AZIMUTH_ANGLE | Double | Solar azimuth angle |
SR_APP_VERSION | String | LaSRC version used to process surface reflectance |
WRS_PATH | Int | WRS path number of scene |
WRS_ROW | Int | WRS row number of scene |
Landsat datasets are federally created data and therefore reside in the public domain and may be used, transferred, or reproduced without copyright restriction.
Acknowledgement or credit of the USGS as data source should be provided by including a line of text citation such as the example shown below.
(Product, Image, Photograph, or Dataset Name) courtesy of the U.S. Geological Survey
Example: Landsat-7 image courtesy of the U.S. Geological Survey
See the USGS Visual Identity System Guidance for further details on proper citation and acknowledgement of USGS products.
相关文章
- Google Earth Engine(GEE)——尝试用JRC水体数据将其转化为为矢量
- Google Earth Engine——如何正确的查询GEE数据集信息和使用
- Google Earth Engine——MODIS总初级生产(GPP)CONUS数据集使用MODIS表面反射率估计CONUS的GPP
- Google Earth Engine ——标准化降水指数(SPI)、蒸发干旱需求指数(EDDI)、标准化降水蒸散指数(SPEI)、帕默干旱严重程度指数(PDSI)和帕默Z指数(Z)数据集
- Google Earth Engine(GEE)——MODIS/061/MOD09A1数据计算逐月FVC并获取逐月的直方图分布和影像下载
- Google Earth Engine(GEE)——用GEE下载全球12级流域矢量数据免费下载(10行代码)
- Google Earth Engine(GEE)——欧洲区域LST、TPW和FVC、B10数据展示和下载
- Google Earth Engine(GEE) ——河流中管理不善的塑料垃圾数据集
- Google Earth Engine(GEE)——全球8,502个污水处理厂(WWTPs)数据集
- Google Earth Engine(GEE)——OSM水图层 OpenStreetMap中的全球地表水数据集(90m分辨率)
- Google Earth Engine(GEE) ——世界人口网格化第4版行政单位中心点与人口数据集
- Google Earth Engine ——瑞士(SWISSIMAGE 10 cm RGB imagery)超高分辨率航空影像数据集(0.1m分辨率)
- Google Earth Engine——MERRA-2 M2T1NXSLV:1980-至今全球压力、温度、风等数据集
- Google Earth Engine(GEE)——墨累全球潮汐湿地变化 v1 (1999-2019) 数据集
- Google Earth Engine(GEE)——国家标识符网格数据集
- Google Earth Engine(GEE)——sentinel2数据介绍
- Google Earth Engine——Murray Global Intertidal Change ClassificationMurray全球潮间带变化数据集
- Google Earth Engine——全球土地覆盖产品的基础数据集是MODIS年度土地覆盖产品(MCD12Q1)中的IGBP层
- Google Earth Engine——潜在的自然植被生物群落的全球预测类别(基于使用BIOMES 6000数据集的 “当前生物群落 “类别的预测。
- Google Earth Engine——海面温度--WHOI数据集是NOAA海洋表面(OSB)的一部分,提供了无冰海洋的高质量的气候数据记录(CDR)
- Google Earth Engine——实时中尺度分析(RTMA)是一个高空间和时间分辨率的近地面天气状况分析。该数据集包括美国全国2.5公里处的每小时分析结果。
- Google Earth Engine——GRACE Tellus月度质量网格提供了相对于2004-2010年时间平均基线的月度引力异常值。该数据集所包含的数据是以 “等水厚度 “为单位,以厘米为单位
- Google Earth Engine ——MYD13Q1.006 Aqua Vegetation Indices 16-Day Global 250m分辨率(NDVI/EVI)数据集
- Google Earth Engine ——LANDSAT8——Real-Time data 数据集
- Google Earth Engine ——全球人类住区层(GHSL)项目由欧盟委员会人口的分布和密度250米分辨率数据集
- Google Earth Engine ——MODIS Fire_cci焚烧区像素产品5.1版数据集
- Google Earth Engine ——数据全解析专辑(COPERNICUS/CORINE/V20/100m)欧洲土地利用数据集1986-2018
- Google Earth Engine ——数据全解析专辑(COPERNICUS/CORINE/V18_5_1/100m)欧洲土地利用数据1986-2012