PAT 1055 The World's Richest[排序][如何不超时]
1055 The World's Richest(25 分)
Forbes magazine publishes every year its list of billionaires based on the annual ranking of the world's wealthiest people. Now you are supposed to simulate this job, but concentrate only on the people in a certain range of ages. That is, given the net worths of N people, you must find the M richest people in a given range of their ages.
Input Specification:
Each input file contains one test case. For each case, the first line contains 2 positive integers: N (≤105) - the total number of people, and K (≤103) - the number of queries. Then N lines follow, each contains the name (string of no more than 8 characters without space), age (integer in (0, 200]), and the net worth (integer in [−106,106]) of a person. Finally there are K lines of queries, each contains three positive integers: M (≤100) - the maximum number of outputs, and [Amin
, Amax
] which are the range of ages. All the numbers in a line are separated by a space.
Output Specification:
For each query, first print in a line Case #X:
where X
is the query number starting from 1. Then output the Mrichest people with their ages in the range [Amin
, Amax
]. Each person's information occupies a line, in the format
Name Age Net_Worth
The outputs must be in non-increasing order of the net worths. In case there are equal worths, it must be in non-decreasing order of the ages. If both worths and ages are the same, then the output must be in non-decreasing alphabetical order of the names. It is guaranteed that there is no two persons share all the same of the three pieces of information. In case no one is found, output None
.
Sample Input:
12 4
Zoe_Bill 35 2333
Bob_Volk 24 5888
Anny_Cin 95 999999
Williams 30 -22
Cindy 76 76000
Alice 18 88888
Joe_Mike 32 3222
Michael 5 300000
Rosemary 40 5888
Dobby 24 5888
Billy 24 5888
Nobody 5 0
4 15 45
4 30 35
4 5 95
1 45 50
Sample Output:
Case #1:
Alice 18 88888
Billy 24 5888
Bob_Volk 24 5888
Dobby 24 5888
Case #2:
Joe_Mike 32 3222
Zoe_Bill 35 2333
Williams 30 -22
Case #3:
Anny_Cin 95 999999
Michael 5 300000
Alice 18 88888
Cindy 76 76000
Case #4:
None
题目大意:给出名字,年龄,财富,并且输入几个以年龄为区间的查询,输出这个年龄段内的规定人数,并且需要按财富非递增排,财富相同按年龄非递减排,年龄相同,那么根据名字字典序有效到大排。
//这是我第一次提交的代码,将其选出来重新排序的粗暴方法,第2个测试点没有过,显示超时,得了22分。
![](https://images.cnblogs.com/OutliningIndicators/ContractedBlock.gif)
#include <stdio.h> #include<algorithm> #include <iostream> #include<vector> #include<string.h> using namespace std; struct Stu{ char name[10]; int age,worth; }stu[100000]; bool cmp(Stu &a,Stu &b){ if(a.worth>b.worth)return true; else if(a.worth==b.worth&&a.age<b.age) return true; else if(a.worth==b.worth&&a.age==b.age&&strcmp(a.name,b.name)<0) return true; return false; } bool cmp2(Stu &a,Stu &b){ if(a.age<b.age)return true; else if(a.age==b.age&&a.worth>b.worth)return true; else if(a.age==b.age&&a.worth==b.worth&&strcmp(a.name,b.name)<0)return true; return false; } int main(){ int n,k; scanf("%d %d",&n,&k); for(int i=0;i<n;i++){ scanf("%s %d %d",stu[i].name,&stu[i].age,&stu[i].worth); } sort(stu,stu+n,cmp2);//一开始应该先按年龄排序~ int no,from,to; for(int i=0;i<k;i++){ vector<Stu> sv; scanf("%d %d %d",&no,&from,&to);//需要用树状数组吗? for(int ii=0;ii<n;ii++){ if(stu[ii].age>=from&&stu[ii].age<=to) sv.push_back(stu[ii]); // if(sv.size()==no)break; } printf("Case #%d:\n",i+1); if(sv.size()==0)printf("None\n"); else{ sort(sv.begin(),sv.end(),cmp); for(int j=0;j<no&&j<sv.size();j++) printf("%s %d %d\n",sv[j].name,sv[j].age,sv[j].worth); } } return 0; }
代码来自:https://www.liuchuo.net/archives/2255
#include <iostream> #include <algorithm> #include <vector> #include <cstring> using namespace std; struct node { char name[10]; int age, money; }; int cmp1(node a, node b) { if(a.money != b.money) return a.money > b.money;//首先根据财富排序 else if(a.age != b.age) return a.age < b.age;//再根据年龄排序, else return (strcmp(a.name, b.name) < 0);//再根据姓名排序 } int main() { int n, k, num, amin, amax; scanf("%d %d", &n, &k); vector<node> vt(n), v; vector<int> book(205, 0); for(int i = 0; i < n; i++) scanf("%s %d %d", vt[i].name, &vt[i].age, &vt[i].money); sort(vt.begin(), vt.end(), cmp1); for(int i = 0; i < n; i++) { if(book[vt[i].age] < 100) {//根据年龄来。 v.push_back(vt[i]);//就算这个年龄的人多余100,那么也不会输出,M最大为100. book[vt[i].age]++;//将其整理到一个新的数组里,按照这个进行查询输出。 } } for(int i = 0; i < k; i++) { scanf("%d %d %d", &num, &amin, &amax); vector<node> t; for(int j = 0; j < v.size(); j++) { if(v[j].age >= amin && v[j].age <= amax) t.push_back(v[j]); } if(i != 0) printf("\n"); printf("Case #%d:", i + 1); int flag = 0; for(int j = 0; j < num && j < t.size(); j++) { printf("\n%s %d %d", t[j].name, t[j].age, t[j].money); flag = 1; } if(flag == 0) printf("\nNone"); } return 0; }
//本题的考点主要就是如何不超时。
1.利用了题目中的信息 M≤100,那么由于N的级数比较大,10^5,对每个年龄的人,如果人数超过100(当前的人已经按财富排好序了)那后后面的人可以舍弃,不会输出
//学习了
相关文章
- js史上最简单的数组合并去重排序
- 垂直个性化排序之Solr如何支持
- java中如何对对象排序?
- php 对多维数组排序array_multisort
- Java实现 LeetCode 80 删除排序数组中的重复项 II(二)
- java实现第四届蓝桥杯快速排序
- Java实现快速排序
- 10大经典排序算法动图演示,看这篇就够了!(配相应代码)
- 如何对数据排序和拆分文件
- 数据结构和算法学习七,之快速排序
- mysql如何用order by 自定义排序
- 如何对数据排序和拆分文件
- 排序算法之归并排序(JAVA)
- leetcode 207. 课程表---拓扑排序篇一
- 64. 基于 OData V4 的 SAP UI5 表格控件如何实现 filter(过滤) 和 sort(排序)功能
- SAP UI5 应用开发教程之六十四 - 基于 OData V4 的 SAP UI5 表格控件如何实现 filter(过滤) 和 sort(排序)功能试读版
- SAP UI5是如何从浏览器读取语言设置并按照优先级排序的
- Jerry 2017年的五一小长假:8种经典排序算法的ABAP实现
- Atitit.并发测试解决方案(2) -----获取随机数据库记录 随机抽取数据 随机排序 原理and实现
- 【leetcode 33】搜索旋转排序数组(第二遍)
- SAP UI5 应用开发教程之六十四 - 基于 OData V4 的 SAP UI5 表格控件如何实现 filter(过滤) 和 sort(排序)功能试读版
- flutter 创建可增型列表和列表排序
- PHP面试题:写一个二维数组排序算法函数,能够具有通用性,可以调用php内置函数(array_multisort())
- Java如何给数组排序Comparable方式
- 260. 只出现一次的数字 III-快速排序法
- 习题 7.15 写几个函数:1.输入10个职工的姓名和职工号;2.按职工号由小到大顺序排序,姓名顺序也随之调整;。。。
- 【SQL开发实战技巧】系列(三十):数仓报表场景☞树形(分层)查询如何排序?以及如何在树形查询中正确的使用where条件
- 数据结构与算法_12 _ 排序(下):如何用快排思想在O(n)内查找第K大元素
- C++如何进行sort的使用——C++如何进行排序
- DSA之十大排序算法第五种:Merge Sort