提供了编程的基础技术教程

zl程序教程

您现在的位置是：首页 >  后端

当前栏目

9.2.2 hadoop全排序实例详解

实例hadoop排序 详解 9.2
2023-09-14 09:07:37 时间

1.1.1         全排序

（1）全排序概述

指的是让所有的输出结果都是有序的，最简单的方法就是用一个reduce任务，但是这样处理大型文件时效率极低，失去的并行架构的意义。所以可以采用分组排序的方法来实现全局排序，例如现在要实现按键的全局的排序，可以将键值按照取值范围分为n个分组，<-10℃，-10℃~0℃, 0℃~10℃,>10℃。实现partitioner类，创建4个分区，将温度按照取值范围分类到四个分区中，每个分区进行排序，然后将4个分区结果合并成一个，既是一个全局有序的输出。

（2）分组排序

分组排序就是按照值的大小将数据进行分组，第i组的数据小于所有第i+1组的数据，每组排序，在合并，就是全局有序。按照上述分区的方法，可能数据落在每个区间内的数据数量并不相同，可能所占比例非常大，有的非常下，这样reduce任务有的处理数据多，有的处理数据少。理想情况是让各个分区所含的记录数大致相等，使作业的总体执行时间不会受制于个别reducer任务。为了让数据尽量均匀的分布到各个区间，又不用对所有数据进行统计（消耗太大），可以通过采样的方法，对数据进行采样分区，得到分区的边界值。

（3）采样分组

用InputSampler对象对输入数据进行采样，得到数据的采样区间分隔值，将这些值写入到一个文件中。然后TotalOrderPartitioner类读取这些边界值作为分区依据。采样分组就是通过采集输入的部分数据，得到相对均匀的分布区间，每个区间的数据量差不多。InputSampler是采样方式有三种：前n条记录采样SplitSample，随机采样RandomSample，固定间隔采样？IntervalSample。

类名称

采样方式

构造方法

效率

SplitSampler(int numSamples, int maxSplitsSampled)

对输入分片均匀采样，每个分片取前n个。

采样总数，用于采样的分片数

最高

RandomSampler(double freq, int numSamples, int maxSplitsSampled)  

遍历所有数据，随机采样

采样频率，采样总数，划分数

最低

IntervalSampler(double freq, int maxSplitsSampled)

固定间隔采样对有序的数据十分适用

采样频率，划分数

中

（4）InputSampler原理

1）InputSampler是个hadoop任务类，继承Configured，实现Tool接口，main函数作为入口函数，run函数用来执行任务，InputSampler还有另外一个writePartitionFile函数，它是将采样的值排序，然后按照分区的数量进行划分，得到边界值写入分区文件，其定义为如下：

public class InputSampler<K, V> extends Configured implements Tool {

    private static final Log LOG = LogFactory.getLog(InputSampler.class);



    static int printUsage() {

        System.out.println("sampler -r <reduces>\n      [-inFormat <input format class>]\n      [-keyClass <map input & output key class>]\n      [-splitRandom <double pcnt> <numSamples> <maxsplits> |              // Sample from random splits at random (general)\n       -splitSample <numSamples> <maxsplits> |              // Sample from first records in splits (random data)\n       -splitInterval <double pcnt> <maxsplits>]             // Sample from splits at intervals (sorted data)");

        System.out.println("Default sampler: -splitRandom 0.1 10000 10");

        ToolRunner.printGenericCommandUsage(System.out);

        return -1;

    }



    public InputSampler(Configuration conf) {

        this.setConf(conf);

    }



    public static <K, V> void writePartitionFile(Job job, InputSampler.Sampler<K, V> sampler) throws IOException, ClassNotFoundException, InterruptedException {

        Configuration conf = job.getConfiguration();

        InputFormat inf = (InputFormat)ReflectionUtils.newInstance(job.getInputFormatClass(), conf);
    //有numPartitions个reduce任务就有numPartitions分区，产生numPartitions个文件

        int numPartitions = job.getNumReduceTasks();
      //获取采样的值

        K[] samples = (Object[])sampler.getSample(inf, job);

        LOG.info("Using " + samples.length + " samples");
      //获取排序函数，对采样值进行排序

        RawComparator<K> comparator = job.getSortComparator();

        Arrays.sort(samples, comparator);
      //获取分区文件的路径

        Path dst = new Path(TotalOrderPartitioner.getPartitionFile(conf));

        FileSystem fs = dst.getFileSystem(conf);
      //如果存在，删除原来的分区文件

        if (fs.exists(dst)) {

            fs.delete(dst, false);

        }
      创建写入对象，创建新的文件

        Writer writer = SequenceFile.createWriter(fs, conf, dst, job.getMapOutputKeyClass(), NullWritable.class);

        NullWritable nullValue = NullWritable.get();
      //获取间隔值的步长，已经排好序之后，每隔stepSize取一个值作为分组的边界值

        float stepSize = (float)samples.length / (float)numPartitions;

        int last = -1;



        for(int i = 1; i < numPartitions; ++i) {

            int k;

            for(k = Math.round(stepSize * (float)i); last >= k && comparator.compare(samples[last], samples[k]) == 0; ++k) {

                ;

            }



            writer.append(samples[k], nullValue);

            last = k;

        }



        writer.close();

    }

//run函数执行采样任务，入参是采样类型

    public int run(String[] args) throws Exception {

        Job job = new Job(this.getConf());

        ArrayList<String> otherArgs = new ArrayList();

        InputSampler.Sampler<K, V> sampler = null;



        for(int i = 0; i < args.length; ++i) {

            try {

                if ("-r".equals(args[i])) {

                    ++i;

                    job.setNumReduceTasks(Integer.parseInt(args[i]));

                } else if ("-inFormat".equals(args[i])) {

                    ++i;

                    job.setInputFormatClass(Class.forName(args[i]).asSubclass(InputFormat.class));

                } else if ("-keyClass".equals(args[i])) {

                    ++i;

                    job.setMapOutputKeyClass(Class.forName(args[i]).asSubclass(WritableComparable.class));

                } else if ("-splitSample".equals(args[i])) {

                    ++i;

                    int numSamples = Integer.parseInt(args[i]);

                    ++i;

                    int maxSplits = Integer.parseInt(args[i]);

                    if (0 >= maxSplits) {

                        maxSplits = 2147483647;

                    }
分区采样

                    sampler = new InputSampler.SplitSampler(numSamples, maxSplits);

                } else {

                    int maxSplits;

                    double pcnt;

                    if ("-splitRandom".equals(args[i])) {

                        ++i;

                        pcnt = Double.parseDouble(args[i]);

                        ++i;

                        maxSplits = Integer.parseInt(args[i]);

                        ++i;

                        int maxSplits = Integer.parseInt(args[i]);

                        if (0 >= maxSplits) {

                            maxSplits = 2147483647;

                        }
                     //随机采样

                        sampler = new InputSampler.RandomSampler(pcnt, maxSplits, maxSplits);

                    } else if ("-splitInterval".equals(args[i])) {

                        ++i;

                        pcnt = Double.parseDouble(args[i]);

                        ++i;

                        maxSplits = Integer.parseInt(args[i]);

                        if (0 >= maxSplits) {

                            maxSplits = 2147483647;

                        }
                     //间隔采样

                        sampler = new InputSampler.IntervalSampler(pcnt, maxSplits);

                    } else {

                        otherArgs.add(args[i]);

                    }

                }

            } catch (NumberFormatException var10) {

                System.out.println("ERROR: Integer expected instead of " + args[i]);

                return printUsage();

            } catch (ArrayIndexOutOfBoundsException var11) {

                System.out.println("ERROR: Required parameter missing from " + args[i - 1]);

                return printUsage();

            }

        }
      // reduce任务数量不能<=2，否则分组就没有了任何意义



        if (job.getNumReduceTasks() <= 1) {

            System.err.println("Sampler requires more than one reducer");

            return printUsage();

        } else if (otherArgs.size() < 2) {

            System.out.println("ERROR: Wrong number of parameters: ");

            return printUsage();

        } else {

            if (null == sampler) {
               //默认采用随机采样

                sampler = new InputSampler.RandomSampler(0.1D, 10000, 10);

            }



            Path outf = new Path((String)otherArgs.remove(otherArgs.size() - 1));

            TotalOrderPartitioner.setPartitionFile(this.getConf(), outf);

            Iterator i$ = otherArgs.iterator();



            while(i$.hasNext()) {

                String s = (String)i$.next();

                FileInputFormat.addInputPath(job, new Path(s));

            }
           //默任执行写入分区文件

            writePartitionFile(job, (InputSampler.Sampler)sampler);

            return 0;

        }

    }



    public static void main(String[] args) throws Exception {

        InputSampler<?, ?> sampler = new InputSampler(new Configuration());

        int res = ToolRunner.run(sampler, args);

        System.exit(res);

    }
public interface Sampler<K, V> {

        K[] getSample(InputFormat<K, V> var1, Job var2) throws IOException, InterruptedException;

    }

}

 

2）InputSampler类定义个一个采样接口Sample接口，定义方法getSample，SplitSample、RandomSample、IntervalSample类都实现了这个接口，采用不同的方法获取采样值。三个类都是InputSampler的内部静态类，实现了getSample方法，下面分别阐述。

SplitSample类定义

总的采样数除以用于采样的分片数量，得到每个分片的取样数n，采取每个分片的前n个数据。

public static class SplitSampler<K, V> implements InputSampler.Sampler<K, V> {

    protected final int numSamples;

    protected final int maxSplitsSampled;

    public SplitSampler(int numSamples) {

        this(numSamples, 2147483647);

    }



    public SplitSampler(int numSamples, int maxSplitsSampled) {

        this.numSamples = numSamples;//采样总数

        this.maxSplitsSampled = maxSplitsSampled;// 用于取样的分片数量，不大于实际分片数

    }



    public K[] getSample(InputFormat<K, V> inf, Job job) throws IOException, InterruptedException {

        //获取分片数
    List<InputSplit> splits = inf.getSplits(job);
    //采样总数创建数组

        ArrayList<K> samples = new ArrayList(this.numSamples);       
    //用于取样的分片数量

        int splitsToSample = Math.min(this.maxSplitsSampled, splits.size());

        //每个分片需要采集多少个数据
    int samplesPerSplit = this.numSamples / splitsToSample;

        long records = 0L;



        for(int i = 0; i < splitsToSample; ++i) {

            TaskAttemptContext samplingContext = new TaskAttemptContextImpl(job.getConfiguration(), new TaskAttemptID());
//创建读取记录的reader

            RecordReader<K, V> reader = inf.createRecordReader((InputSplit)splits.get(i), samplingContext);

            reader.initialize((InputSplit)splits.get(i), samplingContext);



            while(reader.nextKeyValue()) {
//采样数据写入smaple数组

                samples.add(ReflectionUtils.copy(job.getConfiguration(), reader.getCurrentKey(), (Object)null));

                ++records;
             //每个分片只采集前个samplesPerSplit数据，超出则退出

                if ((long)((i + 1) * samplesPerSplit) <= records) {

                    break;

                }

            }



            reader.close();

        }



        return (Object[])samples.toArray();

    }

}

IntervalSample类定义

遍历用于采样的分片数据，根据采样率来等间隔采集数据，例如采样率是0.1，则每隔10个采集一个数据。

public static class IntervalSampler<K, V> implements InputSampler.Sampler<K, V> {

    protected final double freq;

    protected final int maxSplitsSampled;



    public IntervalSampler(double freq) {

        this(freq, 2147483647);

    }



    public IntervalSampler(double freq, int maxSplitsSampled) {

        this.freq = freq;//采样率

        this.maxSplitsSampled = maxSplitsSampled;//用于采样的分片数

    }



    public K[] getSample(InputFormat<K, V> inf, Job job) throws IOException, InterruptedException {

        List<InputSplit> splits = inf.getSplits(job);

        ArrayList<K> samples = new ArrayList();

        int splitsToSample = Math.min(this.maxSplitsSampled, splits.size());

        long records = 0L;//遍历的记录数

        long kept = 0L;//采集的记录数



        for(int i = 0; i < splitsToSample; ++i) {

            TaskAttemptContext samplingContext = new TaskAttemptContextImpl(job.getConfiguration(), new TaskAttemptID());

            RecordReader<K, V> reader = inf.createRecordReader((InputSplit)splits.get(i), samplingContext);

            reader.initialize((InputSplit)splits.get(i), samplingContext);



            while(reader.nextKeyValue()) {

             //假设freq为0.1,第一次循环，record为1，kept为0，0/1小于freq0.1，第一条记录会被采到，kept变为1；第二次循环，record=2，kept=1，1/2大于freq0.1，第二条记录不会取到；kept/records的值从1/2,1/3,1/4……1/10大于等于freq0.1，第11条记录时，1/11小于0.1，第11条记录会被取到，kept变成2，只有到2/21时，才会取第三条数据，所以是每隔10条取一个，是等间隔取数据。
             ++records;

                if ((double)kept / (double)records < this.freq) {

                    samples.add(ReflectionUtils.copy(job.getConfiguration(), reader.getCurrentKey(), (Object)null));

                    ++kept;

                }

            }



            reader.close();

        }



        return (Object[])samples.toArray();

    }

}

RandomSample类定义

随机采样输入参数是采样频率，采样总数，用于采样的的分片数。遍历用于采样的分片中的记录，如果随机数小于采样率则进行采样，添加进入采样数组，或者更换已满数组中的值。同时减小采样率，越往后面，采集到数据的概率越小。

public static class RandomSampler<K, V> implements InputSampler.Sampler<K, V> {

    protected double freq;

    protected final int numSamples;

    protected final int maxSplitsSampled;



    public RandomSampler(double freq, int numSamples) {

        this(freq, numSamples, 2147483647);

    }



    public RandomSampler(double freq, int numSamples, int maxSplitsSampled) {

        this.freq = freq;//采样率

        this.numSamples = numSamples;//采样总数

        this.maxSplitsSampled = maxSplitsSampled;//用于采样的分片数

    }



    public K[] getSample(InputFormat<K, V> inf, Job job) throws IOException, InterruptedException {

        List<InputSplit> splits = inf.getSplits(job);

        ArrayList<K> samples = new ArrayList(this.numSamples);//采样保存申请空间

        int splitsToSample = Math.min(this.maxSplitsSampled, splits.size());//计算用于采样的分片数

        Random r = new Random();//创建随机对象

        long seed = r.nextLong();//创建随机种子

        r.setSeed(seed);

        InputSampler.LOG.debug("seed: " + seed);



        int i;//将分片打乱顺序，随机获取第j个分片，和第i个分片进行交换

        for(i = 0; i < splits.size(); ++i) {

            InputSplit tmp = (InputSplit)splits.get(i);

            int j = r.nextInt(splits.size());

            splits.set(i, splits.get(j));

            splits.set(j, tmp);

        }
    //循环从用于采样的分片中随机获取数据，直到采样分片遍历完（可能数量不够numSamples个），或者已经采集到numSamples个数据
        for(i = 0; i < splitsToSample || i < splits.size() && samples.size() < this.numSamples; ++i) {

            TaskAttemptContext samplingContext = new TaskAttemptContextImpl(job.getConfiguration(), new TaskAttemptID());

            RecordReader<K, V> reader = inf.createRecordReader((InputSplit)splits.get(i), samplingContext);

            reader.initialize((InputSplit)splits.get(i), samplingContext);



            while(reader.nextKeyValue()) {
//随机double值小于采样率，符合条件，进行获取当前值，这样有可能，遍历所有的值，可能没有获取到指定的numSamples记录？

                if (r.nextDouble() <= this.freq) {
//采样数组中数据还不足则add进去，如果已经采集到了numSamples个记录，则随机替换set到sample数组中

                    if (samples.size() < this.numSamples) {

                        samples.add(ReflectionUtils.copy(job.getConfiguration(), reader.getCurrentKey(), (Object)null));

                    } else {

                        int ind = r.nextInt(this.numSamples);

                        if (ind != this.numSamples) {

                            samples.set(ind, ReflectionUtils.copy(job.getConfiguration(), reader.getCurrentKey(), (Object)null));

                        }
//每采样到一个数据，采样率会减小，r.nextDouble() <= this.freq采样到的数据概率会减小

                        this.freq *= (double)(this.numSamples - 1) / (double)this.numSamples;

                    }

                }

            }



            reader.close();

        }



        return (Object[])samples.toArray();

    }

}

（1）   TotalOrderPartitioner

全局有序分区的类，通过函数job.setPartitionerClass(TotalOrderPartitioner.class);输入数据就会将key值传入TotalOrderPartitioner中分getPartition()函数获取分区号。分区是按照采样的结果得出的分区区间。

public class TotalOrderPartitioner<K extends WritableComparable<?>, V> extends Partitioner<K, V> implements Configurable {

 

（2）   随机采样全局排序实例

下面的实例就是将输入文件进行按键值排序，首先采用随机采样的方式，采样率为0.1，从10个分片文件中采集10000个记录的key值。进行排序，如果要分成4个分区，则取2500位置处的5.6℃,5000位置处的13.9℃，7500位置处的22.0℃作为分界点，将温度分为4个区间，将边界值写入分区文件中，TotalOrderPartitioner会读取文件中的值，作为分区边界。这样每个分区内都会得到大致相等数量的数据。处理数据时，会根据温度值调用getPartition()函数，返回所属分区的编号，将该条记录交给该分区的reduce处理。最后得到四个文件，每个文件内都是有序的，且文件之间也是有序的，四个文件合并之后就得到一个全局有序的顺序文件。

温度区间

<5.6

[5.6,13.9]

[13.9,22.0）

>=22.0

 

 

 

 

 

 

package Temperature;



import org.apache.hadoop.conf.Configuration;

import org.apache.hadoop.conf.Configured;

import org.apache.hadoop.fs.Path;

import org.apache.hadoop.io.IntWritable;

import org.apache.hadoop.io.SequenceFile;

import org.apache.hadoop.io.Text;

import org.apache.hadoop.io.compress.GzipCodec;

import org.apache.hadoop.mapreduce.Job;

import org.apache.hadoop.mapreduce.lib.input.FileInputFormat;

import org.apache.hadoop.mapreduce.lib.input.SequenceFileInputFormat;

import org.apache.hadoop.mapreduce.lib.output.FileOutputFormat;

import org.apache.hadoop.mapreduce.lib.output.SequenceFileOutputFormat;

import org.apache.hadoop.mapreduce.lib.partition.InputSampler;

import org.apache.hadoop.mapreduce.lib.partition.TotalOrderPartitioner;

import org.apache.hadoop.util.Tool;

import org.apache.hadoop.util.ToolRunner;



import java.io.IOException;

import java.net.URI;



public class SortTempetatureTotalOrder extends Configured implements Tool {

    public int run(String[] args) throws Exception

    {

        Job job = JobBuilder.parseInputAndOutput(this, getConf(), args);

            if (job == null) {

            return -1;

        }

        //设置输入类型，输出键类型，输出文件类型，压缩、压缩类型

        job.setInputFormatClass(SequenceFileInputFormat.class);

        job.setOutputKeyClass(IntWritable.class);

        job.setOutputFormatClass(SequenceFileOutputFormat.class);

        SequenceFileOutputFormat.setCompressOutput(job, true);

        SequenceFileOutputFormat.setOutputCompressorClass(job, GzipCodec.class);

        SequenceFileOutputFormat.setOutputCompressionType(job, SequenceFile.CompressionType.BLOCK);

        //设置partitioner为全局分区类

        job.setPartitionerClass(TotalOrderPartitioner.class);

        //设置采样随机采样频率为0.1，采样值为10000，用于采样的分片数为10.

        InputSampler.Sampler<IntWritable, Text> sampler = new InputSampler.RandomSampler<IntWritable, Text>(

                0.1, 10000, 10);

        //进行采样，并把分区的边界值写入分区文件中，路径默认设置为mapreduce.totalorderpartitioner.path

        InputSampler.writePartitionFile(job,sampler);

        Configuration conf =job.getConfiguration();

        //将分区文件加入缓冲区，提供给TotalOrderPartitioner读取,getPartition函数会根据键值判断属于哪个分区区间，从而返回partition值

        String partitionFile=TotalOrderPartitioner.getPartitionFile(conf);

        URI partitionUri=new URI(partitionFile);

        job.addCacheFile(partitionUri);

        return job.waitForCompletion(true)? 0:1;



    }

    public static class JobBuilder {

        public static Job parseInputAndOutput(Tool tool, Configuration conf, String[] args) throws IOException {

            if (args.length != 2) {

                return null;

            }

            Job job = null;

            try {

                job = new Job(conf, tool.getClass().getName());

            } catch (IOException e) {

                e.printStackTrace();

            }

            FileInputFormat.addInputPath(job, new Path(args[0]));

            FileOutputFormat.setOutputPath(job, new Path(args[1]));

            return job;

        }

    }

    public static void main(String[] args) throws Exception {

        int exitCode = ToolRunner.run(

                new SortTempetatureTotalOrder(), args);

        System.exit(exitCode);

    }

}

执行任务的hadoop命令如下, -totalsort表示采用全局排序

%hadoop jar Hadoop-example.jar SortTempetatureTotalOrder –D mapreduce.job.reduces=4 input/ncdc/all –seq outout -totalsort

参考文献

https://www.cnblogs.com/xiaoyh/p/9322244.html

 

自己开发了一个股票智能分析软件，功能很强大，需要的点击下面的链接获取：

https://www.cnblogs.com/bclshuai/p/11380657.html

相关文章