【转】ubuntu apt-get update 失败解决
FROM : http://blog.csdn.net/ronghua_liu/article/details/8609450
当运行apt-get update后出现如下错误时:
E: Some index files failed to download, they have been ignored, or old ones used instead.
可以将目录下/var/lib/apt/lists/partial/所有的文件清掉,再次运行apt-get update即可!自带源在大陆不好。
出现以下错误:
- /etc/apt$ sudo apt-get update
- Err http://security.ubuntu.com precise-security InRelease
- Err http://security.ubuntu.com precise-security Release.gpg
- Temporary failure resolving 'security.ubuntu.com'
- Err http://cn.archive.ubuntu.com precise InRelease
- Err http://cn.archive.ubuntu.com precise-updates InRelease
- Err http://cn.archive.ubuntu.com precise-backports InRelease
- Err http://cn.archive.ubuntu.com precise Release.gpg
- Temporary failure resolving 'cn.archive.ubuntu.com'
- Err http://cn.archive.ubuntu.com precise-updates Release.gpg
- Temporary failure resolving 'cn.archive.ubuntu.com'
- Err http://cn.archive.ubuntu.com precise-backports Release.gpg
- Temporary failure resolving 'cn.archive.ubuntu.com'
- Reading package lists... Done
- W: Failed to fetch http://cn.archive.ubuntu.com/ubuntu/dists/precise/InRelease
- W: Failed to fetch http://cn.archive.ubuntu.com/ubuntu/dists/precise-updates/InRelease
- W: Failed to fetch http://cn.archive.ubuntu.com/ubuntu/dists/precise-backports/InRelease
- W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/precise-security/InRelease
- W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/precise-security/Release.gpg Temporary failure resolving 'security.ubuntu.com'
- W: Failed to fetch http://cn.archive.ubuntu.com/ubuntu/dists/precise/Release.gpg Temporary failure resolving 'cn.archive.ubuntu.com'
- W: Failed to fetch http://cn.archive.ubuntu.com/ubuntu/dists/precise-updates/Release.gpg Temporary failure resolving 'cn.archive.ubuntu.com'
- W: Failed to fetch http://cn.archive.ubuntu.com/ubuntu/dists/precise-backports/Release.gpg Temporary failure resolving 'cn.archive.ubuntu.com'
- W: Some index files failed to download. They have been ignored, or old ones used instead.
- xinju@xinjuOffice:/etc/apt$ cd ../network
阿里源:
- deb http://mirrors.aliyun.com/ubuntu/ raring main restricted universe multiverse
- deb http://mirrors.aliyun.com/ubuntu/ raring-security main restricted universe multiverse
- deb http://mirrors.aliyun.com/ubuntu/ raring-updates main restricted universe multiverse
- deb http://mirrors.aliyun.com/ubuntu/ raring-proposed main restricted universe multiverse
- deb http://mirrors.aliyun.com/ubuntu/ raring-backports main restricted universe multiverse
- deb-src http://mirrors.aliyun.com/ubuntu/ raring main restricted universe multiverse
- deb-src http://mirrors.aliyun.com/ubuntu/ raring-security main restricted universe multiverse
- deb-src http://mirrors.aliyun.com/ubuntu/ raring-updates main restricted universe multiverse
- deb-src http://mirrors.aliyun.com/ubuntu/ raring-proposed main restricted universe multiverse
- deb-src http://mirrors.aliyun.com/ubuntu/ raring-backports main restricted universe multiverse
修改ip:
- # This file describes the network interfaces available on your system
- # and how to activate them. For more information, see interfaces(5).
- # The loopback network interface
- auto lo
- iface lo inet loopback
- # The primary network interfacea
- auto eth0
- iface eth0 inet static
- address 192.168.2.170
- netmask 255.255.255.0
- broadcast 192.168.2.255
- gateway 192.168.2.1
- dns-nameservers 192.168.2.1
修改dns:
1,重启生效:
sudo vi /etc/resolvconf/resolv.conf.d/base(这个文件默认是空的)
在里面插入:
nameserver 8.8.8.8
nameserver 8.8.4.4
如果有多个DNS就一行一个
修改好保存,然后执行
sudo resolvconf -u
再看/etc/resolv.conf,最下面就多了2行:
cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 8.8.8.8
nameserver 8.8.4.4
可以看到我们的设置已经加上了,然后再ping一个域名,当时就可以解析了,无需重启。
2,重启失效:
配置文件地址 /etc/resolv.conf
使用编辑器打开
改为如下内容:
search localdomain
nameserver 202.96.128.86 希望修改成的DNS
nameserver 202.96.128.166 备用DNS
重启网络:sudo /etc/init.d/networking restart。即可
相关文章
- ubuntu 报错 E: Could not open lock file /var/lib/dpkg/lock-frontend - open (13: Permission denied)
- ubuntu 更改或重设crontab的默认编辑器
- VMware Workstation虚拟机Ubuntu中实现与主机共享(复制和粘贴)
- ubuntu如何修改字符集编码
- Ubuntu下制作窗口
- linux:ubuntu 21.04安装intellij idea 2021.2,并创建一个helloworld项目
- linux ubuntu 22.04双屏显示颜色变绿问题解决
- Ubuntu解决依赖关系问题
- Ubuntu报“xxx is not in the sudoers file.This incident will be reported” 错误解决方法
- VM之Linux:Linux的Ubuntu中,解决安装后屏幕太小的问题
- 成功解决解决VM软件安装Linux的Ubuntu过程,打开时 Operating System not found
- 成功解决解决VM软件安装Linux的Ubuntu过程,开启Linux出现Oprating System not found错误
- ubuntu切换python版本解决语法不匹配问题(SyntaxError: invalid syntax)
- 【ubuntu】E: 无法获得锁 /var/lib/dpkg/lock-frontend - open (11: 资源暂时不可用)和E: 无法获取 dpkg 前端锁
- 完美解决Ubuntu下无法获得锁 / 检测到系统程序错误 / E: Could not get lock /var/lib/apt/lists/lock
- Ubuntu 18.04 安装 vsftpd
- ubuntu 新建用户只显示$,默认shell管道修改办法
- Ubuntu中Android SDK Manager无法更新解决办法
- launch failed.Binary not found in Linux/Ubuntu解决方案
- 查看ubuntu/centos网络实时带宽
- Win:Win系统下安装Linux的Ubuntu系统的简介、安装之详细攻略
- 成功解决Windows和VM下的Ubuntu虚拟系统之间相互复制粘贴的问题
- Linux系统安装最新python详细步骤与问题解决方法【Ubuntu】
- 【Bug解决】Ubuntu安装pip3:无法定位软件包问题
- Ubuntu安装ffmpeg音视频处理工具:联合解决cuda11+opencv4.6编译bug的问题(cap_ffmpeg_impl/opencv_videoioopencv_cuda*)
- 完美解决VMware虚拟机 Linux系统 Ubuntu 20.04 硬盘/磁盘扩容的问题(超级超级详细)
- Ubuntu中“no required module provides package github.com/mattn/go-sqlite3”问题的详细解决过程